Description
Piletest’s GPC is the next generation of dynamic pile testing systems. It is designed with simplified software and higher ease of use than past systems The GPC system was started by Professor George G. Goble, the pioneer of dynamic pile analyzers. The GPC complies with ASTM D4945 – Standard Test Method for High-Strain Dynamic Testing of Deep
Foundations and Eurocode EN ISO-22477-4. To test a pile, you need to connect only two dual- purpose sensors to it. The system box can be attached to the pile under test and, via a lossless wireless communication, sends all the monitored data to your computer.
This concept makes the construction site work much easier and faster to operate.
To measure four (4) sides of a pile, two main box systems can be operated concurrently with a dual WiFi connection computer. The collected data is processed by three (3) state-of-the-art s/w packages: GPC Acquisition — For collecting the sensors data and presenting real-time driving plots GPC Review — Reporting of test results and capable of automatic signal matching N_GAPA—An Automatic Pile Analysis software for signal matching analysis. Proven to be equal to CAPWAP, and faster.
Features
Lossless Wireless Transmission:
The signal is digitized in the transmitter box. The system is wireless by design using WiFi IEEE802.11ac, which is more reliable than
Bluetooth or 2.4 GHz radio of other dynamic pile testing systems.
Cost Efficient:
The transmitter box has a wire connection (optional). It uses a low-cost standard CAT5 Ethernet cable (vs. expensive DLT cable)
reaching up to 100 meters. Digitization ensures zero signal loss on 100m cable length.
Simplicity:
Single data box for both sides of the pile.
Fast to operate:
Combination transducer, strain gauge, and accelerometer are combined on one bolt-on sensor minimizing drilling time and complexity.
Intuitive Programming:
GUI has been purpose-built to be very intuitive and easy to use with real-time plots.
Spesification
GPC Pro Wireless - Technical Specifications
| Physical
(Ver 1.4) |
Housing
Dimensions
Weight
Temperature range |
Industrial grade DAC enclosed in a durable stainless steel and aluminum housing
102 mm x 160 mm x 305 mm (Ver 1.3)
82 mm x 108 mm x 280 mm (Ver 1.4)
2.3kg (Ver 1.3)
1.9kg (Ver 1.4)
-20°C to +55°C (Operating)
-40°C to +80°C (Storage) |
| Sensors |
Strain Gage:
Resolution
Sensitivity
Nonlinearity
Range
Accelerometer:
Resolution
Sensitivity
Nonlinearity
Range
Sampling frequency
Sampling resolution |
0.5 me
500 me/mV/V Nom.
<0.05%
-3600 to +3600 me
0.01 g
0.060 g/mV/V Nom.
<0.05%
-2000 to +2000 g
10 to 50 KHz
24-bit |
| Standards |
ASTM 4945
EN ISO-22477-10 |
Meets or exceeds ASTM D4945-Standard Test
Method for High-Strain Dynamic Testing of Deep Foundations and EuroCode EN ISO-22477-10. |
| Performance |
Pile lengths
Pile Type |
2m to 100m
Unlimited (Concrete, Steel, Timber) |
| Requirements |
Computer (included) |
Microsoft Windows OS Win 7 /Win 10/ Win 11
1366x768 resolution or better
USB port WiFi 802.11ac
Recommended for BYOD: Tablet PC (outdoor display) |
Reviews
There are no reviews yet.