AlphaUni 300

Description

AlphaUni 300/900/1300, belonging to our Alpha Mobile Mapping series, are high-end multi-platform LiDAR systems that have been designed and improved by CHCNAV based on many years of research and data capture experience. AlphaUni series is a fully integrated system with a high-precision laser scanner featuring Riegl’s unique Waveform-LiDAR technology and a high-accuracy inertial navigation system, ready for demanding surveying missions in the air and on the ground, requiring the highest data quality. The AlphaUni series fulfils our goal to provide the most innovative solutions to professionals in the geospatial sector and help them to save time, reduce costs and complete their projects more easily.

Features

ONE OF THE LIGHTEST UNIT IN ITS CLASS

2.1 kg total weight

LiDAR weight is a constraint for any drone. The drone needs to lift the entire payload, if not, no data acquisition is possible! The lighter the unit, the higher the productivity, because your UAV can fly longer.

HIGH DATA QUALITY

Integrated premium scanners

Users can select either the miniVUX-1 or miniVUX-2 UAV for higher data density. Equipped with industry-leading GNSS and IMU sensors, the AlphaUni300 provides the best combination of point cloud density, precision and survey-grade accuracy.

INTELLIGENT FLEXIBILITY

Support multiple platforms installation

Within 5 minutes, the AlphaUni 300 can be mounted on various platforms, including different models of UAVs, fixed-wing and multi-rotor VTOLs UAS, vehicles, backpacks, USVs and boats, enabling data collection in the most challenging environments.

EXTREME PRODUCTIVITY

Long range UHF modem onboard

Equipped with a unique 8 km UHF data transmission, the parameters of AlphaUni 300 can be set remotely. The operating status of the system can be observed wirelessly in real time, reducing mission preparation time and improving operational efficiency.

3D POINT CLOUD PROCESSING SOFTWARE

Powerful and accurate 3D point cloud generation

CoPre is an advanced, user-friendly 3D laser scanning pre-processing software that can process captured raw data, including POS trajectories, LiDAR data, and RGB images. CoProcess is a reality capture post-processing software providing DEM/DTM generation, semi-automated feature extraction, automatic data classification, and dedicated power line and road inspection modules. With its intuitive interface and efficient workflow, the software significantly improves the productivity of 3D mapping projects.

Spesification

General system performance
Absolute Hz & V accuracy	< 0.050 m RMS
Accuracy conditions	Without control points, @100 m flight altitude AGL
Mounting	Vehicle independent solution, quickly install & release design, easily switch between airborne, vehicle and backpad mode
Weight of instrument (1)	2.1 kg		4.5 kg
Dimensions of instrument	31.86 × 11.0 × 11.0 cm 12.2″ × 4.33″ × 4.33″		31.6 × 20.9 ×15.6 cm 12.2″ × 7.87″ × 5.9″
Communications	1 x synchronization port for 2nd GNSS antenna		1 x synchronization port for 2nd GNSS antenna 1 x RS232 synchronization ports (NMEA support)
Remote control	Up to 8 km, wireless control of instrument parameters and data recording in real time
Point density on UAV setup	40 pts/sqm @ 100 m AGL	450 pts/sqm @ 100 m AGL		620 pts/sqm @ 100 m AGL
4 m/s (14.4 km/h) speed	80 pts/sqm (optional upgrade)
Laser scanner
Laser class	1 (in accordance with IEC 60825-1:2014)
Max. range, reflectivity >80% (2)	330 m	1415 m		1845 m
Max. range, reflectivity >20% (2)	170 m	755 m		1000 m
Minimum range	3 m
Accuracy (3)	15 mm	10 mm		15 mm
Precision (4)	10 mm	5 mm		10 mm
Field of view	360°
Maximum scan rate	100 000 pts/sec upgrade to 200 000 pts/sec	1 200 000 pts/sec		1 500 000 pts/sec
Scan speed(selectable)	Up to 100 scans/sec	Up to 200 scans/sec
Positioning and orientation system
GNSS system	Multiple GPS, GLONASS, Galileo, BeiDou, SBAS and QZSS constellation, L-Band, single and dual antenna support
IMU update rate	Standard 200 Hz (user selectable up to 600 Hz)
Position accuracy NO GNSS outage	0.010 m RMS horizontal, 0.010 m RMS vertical, 0.005 degrees RMS pitch/roll, 0.010 degrees RMS heading
Wheel sensor (DMI)	Yes, optional
Imaging system
Camera type	Modular upgrade options: DSLR, thermal, multispectral, LB5+ 360° spherical camera for vehicle mount
Airborne default camera setup	CHC AS-C420 (calibrated Sony A7 RII)
Resolution	7952 x 5304, 42.4 MP, 5 fps
Environmental
Operating temperature	-10 °C to +40 °C	-20 °C to +40 °C
Storage temperature	-20 °C to +50 °C
IP rating	IP64
Humidity (operating)	80%, non-condensing
Electrical
Input voltage	24 V
Power consumption	32 W	65 W
Power source	Depending on UAV battery. External battery in for car setup, also support direct vehicle power source

Reviews

There are no reviews yet.

Be the first to review “AlphaUni 300”

ALAT UJI GEOTEKNIK

Cart

Description